Vents TT SILENT-M 315 R Mixed-flow fan Ø 315 MM / 1570 M³ + 2050 M³

The Vents TT Silent-M fans combine wide capabilities and high performance characteristics of both axial and centrifugal fans, ensuring a powerful air flow and high pressure. This type of fan is recommended as part of air handling systems for various commercial and industrial buildings with high requirements to noise level, such as in libraries, conference halls, educational institutions, kindergartens, and so on.

The Vents TT Silent-M 315 R Mixed Flow Fan has a soundproof casing made of polymer coated steel. The design not only guarantees quiet operation, but also excellent aerodynamic characteristics. The inside consists of durable, high-quality plastic with a heat and sound-absorbing layer of 50 mm mineral wool. Thanks to the use of sound-absorbing material and perforations on the inside, sound insulation has been realized over a wide frequency. The sound waves are guided through the holes and fall into a specific angle against the sound-absorbing layer for as silent as possible operation.

Another advantage is the higher air pressure and air capacity compared to standard axial fans. This is partly due to the conical rotor and the specially developed profile. The diffuser, impeller and directional blades ensure that the air flow is distributed in such a way that the best combination of high performance, increased pressure and low noise level is achieved.

The fan is equipped with a single-phase, energy-efficient motor with thermal overheating protection to prevent overloading of the motor. The ball bearings extend the life of the motor up to 40,000 hours with non-stop use. You can control the speed with an external switch for multi-speed fans (sold separately).

Mounting the fan is very easy. It can be mounted in any ventilation system at any location and under any angle. You can attach the fan to the floor, wall or ceiling with the corresponding mounting brackets. Installing multiple fans in parallel within one system is no problem. Also handy: the fan is supplied including cord and plug.

Specifications

• Type: exhaust, supply
• Frequency: 50/60 Hz
• Voltage: 230 V
• Power consumption: 230-330 W
• Current: 1-1.42 A
• RPM: 1890-2430
• Maximum air capacity: 1570-2050 m3/h
• Sound pressure level at 3m: 36-40 dB
• Spigot size: 315 mm
• Weight: 25 kg
• Mounting: inline
• Protection rating: IP X4.

Website Vents