Tecoponic HY150

Tecoponic HY150 is a water refrigeration system within hydroponic systems. It is capable of cooling volumes of water up to 150 liters of solution.

When to use TECOPONIC HY150?

Particularly suitable in those situations where the water temperature could exceed 22 degrees and it is necessary to cool it to keep the dissolved oxygen value in the nutrient solution high and thus avoid the proliferation of pathogens and the risk of root rot.

The products of the Tecoponic line stand out for their reliability and high performance, above all thanks to the quality of the components used, such as the high-performance compressors capable of maintaining low noise and lower power consumption.

Main features TECOPONIC HY 150

·       Digital display with water temperature reading.

·       The temperature setting range is 18-22 ° C (64 - 72 ° F).

·       Compact design and easy to install, the condenser is an integral part of the structure.

·       It requires very little maintenance.

·       Equipped with inlet and outlet with 3/4” thread and relative hose connectors.

·       An external pump (not included) is required for operation to push the solution through the chiller.

·       Equipped with resistance, therefore it is also not enabled for heating.

·       Made in Italy design and construction.

Tecoponic HY150 technical features:

·       Power supply: 230V-50Hz 

·       Electric cooling: 150 W

·       Ecological gas: R134a

·       Minimum Water Flow: from 400 l / h to 800 l / h

·       Air flow: 160mc / h

·       Tank Volume: up to 150 lt (water temp. 20 ° C - ambient temp. 30 ° C - thermal load 0,5 w / lt)

·       Dimensions: mm. 215 x 361 x 315 (h)

·       Connections: 3/4” fitting - 16mm tube int.

·       Height 315

·       Width 215mm

·       Depth  361mm

·       Weight 12.2 kg